NEXT Truss SDR30 10x8m

• Quick & easy setup
• Scalable and versatile
• The ideal solution for small and medium-sized events
• Options for expansion and upgrade are available

Motor House

• A common way of using an electric chain hoist is to attach the hoist on top of a truss next to the tower and attach the hook on the other side of the tower to the sleeve block. Another way is to use a so-called “motor house” which will be assembled on the sleeve block and can carry and attach the chain hoist’. When using a motor house, the rig can climb closer to the top of the tower.

International Standards

• The standards of the design are based on recent Eurocodes 1,3 & 9, these are high standard European norms for Structures made out of aluminum or steel. In addition, all our constructions and products are built according to the EN 1090 EXC2 principle.  These standards are recognized worldwide, some countries and locations require an addition. 

Canopy & Sidewalls

• Standard the canopies are grey on the outside and black on the inside, these are also available completely black. For the sidewalls mesh is also available, fire retardant canopy and mesh walls are available on request.

Ballast

• The needed ballast per tower depends on the size and the roof configuration:

• Canopies, is the roof only covered with the top, or with the back wall, or complete with sidewalls?
• Bases,  with compression or stand-alone bases
• Anti-slip material between bases and substrate
• Weight of load or stage integration

 Wind Control

• The SDR30 has a maximum wind speed of 17.8m/s or, 64km/h – 40mph*, this calculation is valid when all the canopies are installed. If the winds reach this speed or above the side and back walls should be removed, after that the Out of Use cables should be attached. At this point the construction can hold upwind speeds up to 28.0m/s – 100km/h – 62mph*